Massive DC 10 - Car Audio Subwoofer 

 

 Massive DC 10 - Car Audio Subwoofer supplied by john kleis

Designed for the serious low frequency enthusiast the Massive DC will produce that “tight” chest pounding street bass with crystal clear quality.
 
Only the best materials go into DC Series woofers and one note is all it takes to send “Direct Current” thru the window and into the brain.
 
10 inch, 600 Watts RMS / 1200 Max, Dual 4 Ohm 2.5" voice coils.
SKU   SKUDC10
Weight  30.00 Pounds
Size  10
Watts  1200
RMS  600
Cone  Finger "V" Ultra Light
Voice Coil  2.5" Dual 4 Ohm
Surround  1" Tall Santoprene
Magnet  120oz Flux Ferrite Y40
Terminals  Push-In or Bannana Nickel Plated
Basket  Aluminum Die-Cast
Tinsel Leads  Woven Silver Plated
X-Max  40mm peak to peak
SPL  90.6 dB
Ported Box  12"h x 16"d x 20"w
PORT: 10.5" x 1.25" x 11"
 
 

Massive CT 1a - Aluminun Tweeter 

 

 Massive CT 1a - Aluminun Tweeter supplied by john kleis

Massive Audio's CT Series Tweeters featuring neodymium magnets and 12 dB crossovers are available in 3 Ferro cooled designs.
 
The CT1a 25mm Tweeters are aluminum domes that come with flexible mounting options including surface or flush mount.
 
 
SKU   SKUCT1a
Weight  3.00 Pounds
Size  25mm Dome
Design  Aluminum
Sensitivity  90dB
Frequency  1.2 kHz - 20 kHz
RMS Power  2-60 watts
Peak Power  120 Watts
Impedance  4 Ohm
Mounting  Flush, Angle, Surface, 360 Swivel
Crossover  12 dB Poly Switch
 

Massive EQ 4P - Car Audio Equalizer 

 

 Massive EQ 4P - Car Audio Equalizer supplied by john kleis

The Massive EQ 4p will not only correct peaks and dips in sound characteristics associated with most vehicles’ interior that dampens and limits both speaker output and imaging.
 
It will manipulate the frequencies themselves with the bandwidth control for each of the separate bands. Features include 4 frequency band controls within the range of 20Hz - 20 kHz. (Sub, Mid, High, Low) Half Din, 4 band Parametric Equalizer, 8v Line Driver, auxiliary inputs, fader, sub control, pulse width modulated (PWM) switching power supply, low noise Bi-FET op-amp design for minimum distortion. Adjustable center frequency for each band.
 
SKU   SKUEQ4P
Weight  4.00 Pounds
BAND  4 Band
Din Size  1/2 Din
Equalization  Parametric
Line Driver  8v
Aux Input  Aux Switch / RCA
Power Supply  30V Bi-FET
Sub Control  Yes
Fader  Yes
Output Jacks  6 RCA Out
Center Control  Adjustable 4 Band