|
ALPINE Multi-View Rear Camera
System
The rear view camera comes with an image processor (black
box) and a control switch. It offers four viewing modes. Standard View shows what is behind. Corner
View displays a split screen of left/ right views for easier turning while reversing. Top View
shows how close you are to objects, like looking down from above. Panorama View gives a 180° view
so you can check that nothing is behind the car.
Panorama View
Displays a wide (about 180°) view behind the car. This is
useful whenever you are backing up.
Rear View
Displays what is directly behind the car. Useful when backing
into a parking space.
Top View
Displays an image from above down to the lower section of the
car. The driver can use this to determine how close he is to objects in the rear. This is very
useful when in a parking space, to back all the way in.
Corner View
Displays a split screen of images to the left and right. This
lets the driver see if anything is coming while he is backing out with his vision blocked, from
between two vans, for example.
MODE button
The rear view camera comes with an image processor (black
box) and a control unit. The camera automatically turns on and the display comes on when the car is
shifted into reverse. There are four viewing modes, which are selected via the MODE button.
Extension Kit
The multi-view rear camera system can
be optionally extended with a front view camera HCE-C200F which allows the driver to see what
normally cannot be seen from the driver´s seat, thus greatly improving driving
safety.
|
